Quick Links - Alpha Controls & Instrumentation Inc.
Social media
Contact information
Address
361 Steelcase Road West
Unit 6
Markham, ON L3R3V8 - Canada
Phone
(905) 477-2133
Fax
(905) 477-4219
361 Steelcase Road West
Unit 6
Markham, ON L3R3V8 - Canada
(905) 477-2133
(905) 477-4219
Explosion protected lights with auto-testing emergency ballast
Utilize explosion protected components with stainless steel enclosures for the ultimate flexibility, safety and durability
Provide unique solutions for electrical connections in hazardous and corrosive environments
Control cabinets and system components for all aspects of instrumentation for installation in the control room
Enclosures made of stainless steel (AISI 304) or (AISI 316L), IP66
Used to activate alarm circuits in hazardous and or wet, corrosive industrial applications
Designed to incorporate control and display devices, polyester resin
Panel mounted control devices that are typically mounted in an electrical panel or enclsoure
Available for power circuits and intrinsically safe circuits, consists of LED/power pack, one mounting bracket and one bezel/lens assembly
Explosion protected for hazardous and corrosive applications
Utilize explosion protected components with non-metallic enclosures for the ultimate flexibility, safety and durability
Explosion protected emergency lights for hazardous and corrosive applications
Available with single or duplex receptacles, in 16 or 30 amps with a variety of voltages, and pin configurations
Pre-configured stainless and carbon steel terminal boxes with Phoenix terminals
Provide unique solutions for electrical connections in hazardous and corrosive environments
Designed to incorporate control and display devices, stainless steel
Designed to incorporate control and display devices, sheet steel or stainless steel
Modular remote I/O system for mounting on 35 x 15mm DIN Rail, modules are hot swappable
Explosion protected for hazardous and corrosive applications
D.P.D.T. switch rated at 10 amps, terminal block connections
One actuator operates two contacts and simultaneously can indicate their actual operating status by LED
Ideal method of explosion protection where components internal to the enclosure cannot be specifically rated for the area
Series of pilot lights are available for standard and intrinsically safe appliactions
Explosion protected for hazardous and corrosive applications
16 amp rotary switches that come in either ON-OFF or as THREE-WAY types to switch lighting circuits from two different locations
Assembly consists of contact blocks, a mounting bracket and an actuator
Explosion protected emergency lights for hazardous and corrosive applications
Measure and source mA, volts, temperature (RTDs and thermocouples), frequency, ohms, and pressure, using optional pressure modules
Take intrinsically safe temperature measurements in hazardous environments anywhere in the world
Self-contained pressure calibrator provides a total pressure calibration solution for transmitters, gauges, and switches
Fast one-handed tool for mA loop checks in explosion endangered areas
All the test and troubleshooting power you need is packed into the most rugged intrinsically safe multimeter Fluke has ever built
4 - 20 mA process output, a robust NEMA 4X enclosure, large LCD display, and password protected set up menu
