Dwyer

Ideal for use with the Series DCT1000 and Series DCT500 duct collection timer boards

An ideal low cost hydraulic reservoir shut off valve

RS-422/485 serial adapter.

Meter copy cable.

RS-232 serial adapter.

An easy to use Windows® based program

Encapsulated microfiber filter elements are able to filter particles as small as 0.1 micron

.260-.275" OD, 1/4-18 NPT, FEP compression fitting

23-3/4" to 24-1/4", pipe adapter

K type, 100' on spool, FEP insulation, 200°C, yellow outer sheath, 24 AWG, 0.20 SQMM

K type, 100' on spool, fiber glass insulation, 450°C, yellow outer sheath, 24 AWG, 0.20 SQMM

K type, 50' on spool, FEP insulation, 200°C, yellow outer sheath, 24 AWG, 0.20 SQMM

K type, 50' on spool, fiber glass insulation, 450°C, yellow outer sheath, 24 AWG, 0.20 SQMM

Wall Mounting Kit

Meter mounting kit

Clear flexible vinyl tubing

Clear flexible vinyl tubing

Rubber tubing has less tendency to kink in storage and occupies less space, thus is best for portable work

Rubber tubing has less tendency to kink in storage and occupies less space, thus is best for portable work

Aluminum tubing is recommended for permanent installations

Aluminum tubing is recommended for permanent installations.

An economical hand lever ball valve ideal for commercial or general industrial use

Metric air velocity calculator slide chart.

Shutoff type gage connector for 3/16 in rubber tubing

Temperature transmitter enclosure used to mount Series 651 and 659 transmitters to any 1/4 in diameter temperature sensors

Allows users of the TS2, TSS2, TSX, TSF, and TSWB Series to quickly program multiple controllers without external power

Lift loop / hanger for submersible level transmitters

Cable hanger

1/4" nylon tube union

L-type mounting bracket

Rubber tubing to 1/4 in ID plastic tube for 1221, 1222, and 1227 manometers

Adapter, brass, 1/8" NPT to 3/16" rubber and 1/8" ID plastic tubing

1 oz dispenser bottle fluorescein green color concentrate

Spare calibration kit for the Dwyer SAH SMART hoods

SMART hood adapter base kit for the Dwyer SAH SMART hoods

Power supply suitable for powering all Dwyer pressure, temperature, or air velocity transmitters

Vane hood kit to convert a thermo-anemometer into an air volume flow balancing tool for use with small grills and diffusers for the...

Carrying case for pitot tubes up to 48 in

Large, open tip design resists fouling and with permanent mounting models available

Terminal tube, brass, 1/4" diameter tube, 8" length

Digital temperature switch probes to be used with Series TS, TS2, TSX, TSS2, and TSWB instruments

1/8" NPT close coupled street ell, brass

Duct pressure monitor kit

16 ft. shielded cable with 4-pin M-12 connection

Flat aluminum bracket for flush mounting Photohelic and Capsuhelic gauges

Tough gray nylon pouch to protect and series 477AV manometer

Plastic carrying case for Magnehelic® gage of standard range

Plastic 3-way vent valve with 80 PSI rating