Intrinsic Safety and Explosion Protection

High degree of protection IP66/67 is standard, IP67 without breather

Ex d enclosure system made of light metal Series

Polyester resin, 690 V, 6x 1-conductor, 185 mm2, 2x 1-conductor, 185 mm², green-yellow, Zone 1/2/21/22

mA isolating repeater allows two 4 to 20 mA signal sources to be coupled

Transmitter supply units w/ limit values can be used for the intrinsically safe operation of two- & three-wire transmitters or for...

Ex i transmitter supply units are used for the intrinsically safe operation of 2- & 3-wire transmitters or intrinsically safe mA...

"CUBEx" standard motor control units are installed in a seawater-resistant Ex d enclosure

Eight channels for resistance temperature detectors, potentiometers, thermocouples, mV sensors and joysticks

8 channels for pneumatic valves

With up to 8 de-energised relay contacts

8 channels for Ex i solenoid valves up to 30 mA

Load disconnect Switches series

Available for power circuits and intrinsically safe circuits, consists of LED/power pack, one mounting bracket and one bezel/lens...

Practical Ex e control boxes made of glass fibre reinforced polyester resin

Control stations with quadruple certification (NEC®, CE Code, ATEX, IECEx)

Quad certified control stations (NEC®, CE Code, ATEX, IECEx)

Flexible: Modular design and three sizes make customer-specific versions possible

Quad certified control stations (NEC®, CE Code, ATEX, IECEx)

Two-pole off switch or two-way switch version

Long-life, energy-saving, midpower LEDs embody design innovation

High availability: Reliable motor contactors: 4 kW/400 V

High availability: Reliable motor contactors: 4 kW/400 V

High availability: Reliable power contactors for switching and changeover of high AC1 currents

Residual current monitoring and tripping in the event of overvoltage

Modular component for residual current monitoring

Non-adjustable thermal and magnetic releases

Vibration transducer power supply units connect vibration, acceleration and speed sensors to analysis systems

Ex i frequency transmitters monitor the speed of rotating parts on one or two channels, e.g. the speed of fans or centrifuges

Compact Ex i power supply is used to provide field devices

Time- and cost-saving installation on DIN rails or mounting plates

Temperature transmitters for Ex i field circuits are used to connect temperature sensors and potentiometers

To provide Foundation Fieldbus H1 segments (high-power trunk) with a single or redundant power supply

To provide Foundation Fieldbus H1 segments (high-power trunk) with a single or redundant power supply

Time- and cost-saving installation on DIN rails or mounting plates

Operation of 16 Ethernet-APL or PROFIBUS PA field devices (PA proxy, only for 9740/13-16-41)

Eight channels for resistance temperature detectors, potentiometers, thermocouples, mV sensors and joysticks

Operation with 100BASE-TX (Zones 1, 2) and optionally 100BASE-FX (Zone 2)

A universally applicable RFID card reader for hazardous areas

High degree of protection IP66 / IP67, IP67 without breather

Type-tested standard components

Ex e control boxes made of stainless steel that can be individually equipped

Type-tested standard components for time-delayed switching

Connection of standard antennas in Zones 1, 2, 21, 22 (in conjunction with 9730/26-11)

Makes it possible to use Series 9790 antennas or antennas classed as intrinsically safe, & standard coaxial plug connectors in...

Use of standard wireless devices in Zone 1

8 FOUNDATION™ Fieldbus H1 segments via a selectable H1 network

Access to Multi-Screen computers

8 channels for Ex i solenoid valves up to 30 mA