Quick Links - Alpha Controls
Social media
Contact information
Address
361 Steelcase Road West
Unit 6
Markham, ON L3R3V8 - Canada
Phone
(905) 477-2133
Fax
(905) 477-4219
361 Steelcase Road West
Unit 6
Markham, ON L3R3V8 - Canada
(905) 477-2133
(905) 477-4219
Compatible with both Pt100 sensors and thermocouples and features high vibration resistance and noise immunity
Compatible with both Pt100 sensors and thermocouples and features high vibration resistance and noise immunity
Multi-range 2-wire in-head, high reliability, excellent industrial performance, low cost
Digital, easy-to-use temperature transmitter developed specifically for measurements with Pt100 sensors
Multirange temperature transmitter with Pt100 or Pt1000 input and 0-10 V output
Accepts RTD, T/C, mV and Ω, simple configuration, error correction functions
Offers outstanding accuracy, stability and high isolation combined with short response time and extended functionality
Low profile housing, programmable for RTD's in 3- and 4-wire connection as well as for 11 T/C types
Universal, isolated, dual-input temperature transmitters with additional voltage and resistance input
Utilizes HART protocol for remote configuration and monitoring, accepts RTD, T/C, mV and Ω
Dedicated for Pt100 sensors, excellent performance and accuracy under harsh conditions
Basic, non-isolated, easy to use, accepts RTD in 3- and 4-wire connection and 11 T/C types
Designed for highest reliability and excellent industrial performance, rangeable with solderpads and potentiometers
Universal, cost effective transmitter, linearized and isolated, accepts RTD, T/C, mV and Ω
Universal, cost effective transmitter, linearized and isolated, accepts RTD, T/C, mV and Ω
Communicates with HART Communicator or PC via modem, accepts RTD, T/C, mV and ohm
Extra high accuracy and stability, accepts RTD, T/C, mV and Ω, 40 point linearization
High accuracy, stability and reliability combined with a robust housing, compatible with the HART 6 protocol
HVAC applications, 0 V - 10 V output, rangeable with solder pads and potentiometers
Offers both current and voltage, high level isolation – 4000 VAC, accepts RTD, T/C, mV, V, mA and Ω
Adjustable measuring range from 100 Ω up to 100 kΩ, short response time is ideal for valve and actuator feedback
For Pt100 sensors, robust, IP67 casing with M12 connections in both ends
Designed for input signal from one or two Pt100 sensors in 4-wire connection and output in mA or V, outstanding accuracy of ±0.03 °C (±0.05 °F)
Isolators for 0(4) - 20 mA signals with high isolation and protective separation
Isolators for 0(4) - 20 mA Signals, input to output galvanic isolation
Isolators for separation of 0(4) - 20 mA signals, no power supply required
Isolation transmitter for unipolar mA/V signals with fixed ranges
Isolation transmitter for unipolar mA signals with fixed range and zero/span adjustment
Isolation transmitter for bipolar and unipolar mA/V signals with extensive range selection and zero/span adjustment
Isolation transmitter for unipolar shunt voltages with calibrated range selection
Isolation transmitter for bipolar and unipolar mA/V signals with fixed ranges
Isolation transmitter for unipolar mA/V signals with calibrated range selection
Isolation transmitter for unipolar mA/V signals with calibrated range selection
Isolation transmitter for bipolar and unipolar shunt voltages with extensive range selection and zero/span adjustment
Transmitter repeater for powering and isolation of 2-wire transmitters
Isolation transmitter for unipolar mA/V signals with fixed ranges
Isolator provides galvanic separation for 0(4) - 20 mA standard signals, while transferring the measurement signal to the output with a high degree of accuracy
Slim DIN rail 4-wire signal splitter/repeater with double outputs for mA and V signals, input and outputs are selected using DIP switch
Isolation transmitter for mA/V signals with calibrated range selection
Isolation transmitter for bipolar and unipolar mA/V signals with calibrated range selection
Transmitter repeater for powering and isolation of 2, 3 and 4-wire transmitters
6.2 mm wide, used for supplying the In-Rail-Bus DIN rail connector with supply voltage
_Programmable_2-Wire_Isolation_Transmitter__00958_th.jpg)
Isolation transmitter for mA signals, suitable for direct connection to the input modules of a control system
Designed for field mounting on wall, pipe or DIN rail and has a rugged and splash proof housing
High-contrast, 4-digit LCD display with 17.8 mm / 0.7 ” digits for field mounting
LCD indicator for direct connection to the ProfIPAQ-H/-L transmitters
Digital indicator for installation directly in a 4 - 20 mA loop without need for external power
Universal transmitter that accepts RTD, T/C, mV and Ω, 40 point linearization
Monitors Pt100 signals, providing a temperature linear output signal, 4 - 20 mA
Four galvanically isolated supply channels for 2-wire transmitters
HART® temperature transmitter compatible with RTD, thermocouples, voltage and potentiometer sensors, wireless communication
HART® temperature transmitter compatible with RTD, thermocouples, voltage and potentiometer sensors, wireless communication
Power terminal used for supplying the in-rail-bus DIN rail connector with supply voltage
INOR is one of the world's leading manufacturers of temperature measuring instruments and services. These products include temperature transmitters, signal conditioners, and loop powered isolators and are used widely in the global process industry and OEM markets. With application competence, adapted solutions, short lead times and smart logistics, INOR is a partner creating values to our customers by contributing to their operations excellence, profitability, safety and sustainability. Today, products and services of INOR are available in more than 100 countries worldwide.
