Automotive

Power supply, 100 - 240 VAC

Optional waterproof probes available in various lengths and camera orientations for the DS701 and DS703 FC

Standard replacement sensor for the AII GPR-1500 GB/GPR-2500 GB oxygen analyzers

Replacement oxygen sensor for gas mixtures with CO2 for use with the GPR-2600 and GPR-2900 oxygen analyzers

Standard replacement sensor for the AII GPR-2600 oxygen analyzer

Replacement sensor with a lowest range of 0-50 ppb for use with the AII PI2 oxygen analyzer

HART-USB modem with DIN retail and ATEX

4 each 1.125" (28.5 mm) diameter access ports with a window configuration (ST Models Only)

Standard replacement sensor for the aII GPR-1200 and PI2 oxygen analyzers

Replacement sensor for CO2 backgrounds for use with GPR-1100, GPR-1200, GPR-1500, GPR-1600 and GPR-1900 oxygen analyzers

Mini-USB to full USB cable

Weather-proof enclosure that provides means to protection-mount all Macurco 6-Series gas detectors in non-hazardous locations

Airtight enclosure that provides a means to mount any Macurco gas detector to an air duct

HART® Communicator Software

Rubber boot

Panel mount bracket

Rubber boot, rear port

Rubber boot, bottom port

4-pin bayonet mating connector (E3) with 5 ft. cable ( L1, L3, L10 only)

HART - USB modem with DIN rail

HART- USB modem

¾ in. NPT mount junction box with one liquid tight connector and cap with junction terminals

Rotor with PVDF Black, PVDF Natural or ETFE (Tefzel) material options

Transmitter integral mounting kit- NPT, valox, polypropylene or PVDF options

Retaining nut replacement kit- retaining nut, NPT, valox or polypropylane or PVDF

Universal mount junction box

Universal mounting kit

Digital input plug-in module slot A

RS-485 communications plug-in module slot A

Triac plug-in module slot 2

SSR driver plug-in module slots 2 and 3

Angle adapter for Meriam well type included tube manometers

Plastic line trap, ring type, for Meriam well type manometers

Indicating fluids for the Meriam manometers

N.I.S.T. certificate / scale for Meriam manometers

1/4 in NPT street elbow in steel for the 10AA25 Clean-Out U-Type manometer

Float check valve for Meriam manometers

Four channel swith input module for the QEL Q-Controller

Type K thermocouple with 6 in x 1/8 in dia and a 36 in. long lead wire

Stainless steel sintered filter, 30 microns with fittings

Rated for 150 PSIG, The HP125 gets installed into a 3.5 inch diameter PVC threaded pipe flange, 4 bolt install, includes rubber gasket

Rated for 300 PSIG, The HP125 gets installed into a 3.75 inch diameter 304 SS Threaded Pipe Flange, 4 bolt install, includes rubber...

Bearing

Gasket

Bluetooth Headset for TiX560, TiX520, TiX500, Ti450, Ti400, Ti300, TiS75, TiS65, TiS60, TiS55, TiS50, TiS45, TiS40, TiS20, TiS10

Mounting bracket for use with the Dwyer wireless differential pressure probes

Heavy duty hard case with pre-cut foam inserts for the Dwyer UHH2 and additional sensors

Field upgradeable LCD for the Dwyer Magnesense II differential transmitter