Automotive

Field upgradeable LCD for the Dwyer Magnesense II differential transmitter

Neck strap for the DS701 and DS703 FC diagnostic videoscopes

Replacement sensor with a lowest range of 0-100 ppb for use with the AII PI2 oxygen analyzer

PTFE antenna enclosure, 1 1/2" NPT

End clip for DIN rail

1 meter length DIN rail

Conductive level with control switch, 1 or 2 SPDT relay and 24-240 V AC/DC or 24 V AC/DC output

2-valve block manifold

9 V power adapter

Magnehelic gage panel mounting flange

Allows Magnehelic to be conveniently installed on horizontal or vertical1-1/4 in to 2 in pipes

5/16" nylon tube union

Remote display with mini USB display

Loop powered galvanic barrier for use with intrinsically safe transmitters.

J type, 50' on spool, FEP insulation, 200°C, black outer sheath, 24 AWG, 0.20 SQMM

J type, 25' on spool, FEP insulation, 200°C, black outer sheath, 24 AWG, 0.20 SQMM

J type, 25' on spool, FEP insulation, 200°C, black outer sheath, 24 AWG, 0.20 SQMM

Extendable pole required for operation of all Dwyer SAH models

USB to mini-USB cable for use with the Dwyer UHH2 universal handheld base unit

Replacement plastic hydrophobic filter.

Replacement sensor, 16' cable

Replacement sensor, 12' cable

J type, 100' on spool, FEP insulation, 200°C, black outer sheath, 24 AWG, 0.20 SQMM

J type, 100' on spool, fiber glass insulation, 450°C, black outer sheath, 24 AWG, 0.20 SQMM

Provides the system with improved chamber temperature uniformity

Provides a gas flow rate of 10 to 40 Liters per minute; however this option is only available with the 2500ST model

Trace moisture sensor with stainless steel flow through head

Micro-fuel cell for % or ppm range

Micro-fuel cell only for CO2 and Oxidizer background gas

Includes wafer replacement and membrane kit

Wafer replacement only, this is the moisture sensor element (wafer) plus mounting parts

PVDF Natural, rotor kit (rotor and pin)

Blue sensor cap

Sleeved rotor with PVDF Black, PVDF Natural or ETFE(Tefzel) material options

Provides external temperature probe access through the top panel for measurement of the saturation temperature

Sample chamber,flow through, 316 SS with 1/8” NPT inlet & outlet ports

Sensor complete with sample chamber

Sensor cable with connectors

Rotor kit with tungesten shaft

Rotor kit with stainless steel shaft

Key activation for data log pro

4-pin female micro connector (M12) mating connector (E4) field wireable

4-pin female (M12) mating connector (E4) with 5 meters cable

4-pin female (M12) mating connector (E4) with 2 meters cable

3 pin packard connector with cable options

6-pin bayonet mating connector or connector with 2 ft cable

BACnet output module for the QEl Q-Controller