Automotive

Large 1" display digits, field mountable enclosure, approved for hazardous areas

Low cost, easy to install and program, can be seen from considerable distance, -40 to 85°C operating temperature

Displays flow rate and total from a pulse output flowmeter, standard backlight, approved for hazardous areas

RS485 serial input Modbus® RTU scanner, scans up to 16 Modbus variables and displays them on an easy-to-read, dual-line, LCD display

Plastic, 1" display digits in a field-mountable enclosure designed for demanding applications

Plastic, field-mounted flow rate/totalizer, displays flow rate and total from a pulse output flowmeter

Plastic, field-mounted, RS485 serial input Modbus® RTU scanner, displays up to 16 Modbus variables

Economical loop-powered meter, approved for hazardous areas, optional backlight feature

1/8 DIN, loop-powered, intrinsically safe & nonincendive flow rate/totalizer, dual-line display (5 digits on top, 8 on bottom)

1/8 DIN flow rate/totalizer, dual-line display (5 digits on top, 8 on bottom), designed for demanding process control applications

Perfect for applications where a simple, inexpensive display is required and AC power is not available, CSA

DIN mountable models for signal isolation, splitting and conditioning of 4-20 mA and 0-10 VDC signals

1/8 DIN, accepts a DC voltage input up to 300 VDC, built-in 4-20 mA isolated transmitter

1/8 DIN, displays flow rate and total from two pulse output (NPN, PNP, TTL, switch contact, sine wave, etc.) flowmeters

Pulse input (NPN, PNP, TTL, switch contact, sine wave, etc.), designed for single and multi-stage batching applications

1/8 DIN pulse input (NPN, PNP, TTL, switch contact, sine wave, etc.) digital batch controller designed for single and multi-stage...

1/8 DIN, displays flow rate and total from a pulse output (NPN, PNP, TTL, switch contact, sine wave, etc.) flowmeter

1/8 DIN, designed to display flow rate and total from two analog output (4-20 mA, 0-5 V, 1-5 V, etc.) flowmeters

1/8 DIN analog input (4-20 mA, 0-5 V, 1-5 V, etc.) digital batch controller designed for single and multi-stage batching applications

1/8 DIN, designed to display flow rate and total from an analog output (4-20 mA, 0-5 V, 1-5 V, etc.) flowmeter

1/8 DIN, accepts strain gauge & load cell inputs and mV signals up to 300 mV (unipolar) and ± 250 mV (bipolar) for weight indication...

Displays level information on a feet & inches display, scans up to 16 Modbus process variables

Decimal display, displays up to 16 Modbus process variables (PVs) on the bus using its RS-485 serial input

Displays level information on a feet and inches display, scans up to 16 Modbus process variables, dual analog inputs

Multi-purpose decimal display and controller, scans up to 16 Modbus process variables and accepts two analog process inputs

1/8 DIN, dual analog input, process current (4-20 mA) or process voltage (0-5V, 1-5V, etc.), dual line, 6-digit display

1/8 DIN digital panel meters designed to display level in feet and inches, 4-20 mA or 0-5V, 1-5V, etc., dual line display

PID Process & Temperature Controllers are a complete line of PID and on/off controllers

Installed virtually anywhere to provide convenient and informative display of any 4-20 mA signal

Installed virtually anywhere to provide convenient and informative display of any 4-20 mA signal

Installed virtually anywhere to provide convenient and informative display of any 4-20 mA signal

Installed virtually anywhere to provide convenient and informative display of any 4-20 mA signal

Programmed to display a value of 0-100% relating to the 4-20 mA output

4-20 mA current loop, provides a convenient way to generate a 4-20 mA signal that can be used to control another device

Accept a variety of thermocouples and RTDs and displays temperature on a six digit display

For Batch controlling using a pulse output flowmeter, huge display, IP65 rated field mountable enclosure

Displays both flow rate and total at the same time from a pulse output flowmeter, IP65 rated field mountable enclosure

Displays two 4-20 mA flowmeter inputs on one meter and rate and total simultaneously, math functions

Batch controlling using a 4-20 mA output flowmeter, huge display, IP65 rated field mountable enclosure

Displays both flow rate and total at the same time from a 4-20 mA output flowmeter, IP65 rated field mountable enclosure

Ideal for weighing applications or outside in the bright sunlight in temperatures between -40 to 150°F

Dual analog inputs, displays up to 16 Modbus registers, operates from -40 to 150°F

Dual analog inputs, displays up to 16 Modbus registers, accepts two 4-20 mA signals

Displays two 4-20 mA inputs, each transmitter is provided with its own 24 VDC transmitter power supply

Display will read up to 99 feet, 11 & 15/16s inches on the upper line, operate from -40 to 150°F

Dual line display, super bright LEDs can be read in bright sunlight up to 100 feet away

An open channel flow meter that doubles as a tank level meter

Safe high-intensity illumination for sight glasses, ports, or general applications in hazardous locations