Product Finder

4 Relay Board for CT7110

Circular paper refill, 100 qty., 24-hr

2000 Ohm resistor, ±0.025% accuracy

250Ω precision resistor

Optical isolator between iNET-240 controller and device

20,000 Ohm resistor, ±0.025% accuracy

4700 Ohm resistor, ±0.025% accuracy

200 Ohm resistor, ±0.1% accuracy

Communication Tool Kit for TXUN Series and DRST-FR

Fail safe valve (models 088M and 125M only)

Sensor mounting kit, 1 required

DPP-10M-14M inductive sensor mounting kit - mounts 2 sensors

Field replaceable 71.88 L mm (2.83') short probe with M12 connector

Field replaceable remote probe with 3 m (10') cable and M12 connecto

Calibration kit, 11 and 75% relative humidity standards

High Pressure Solenoid Valve

14 W coil for 14 Vdc/50 TO 60Hz

14 W coil for 24 Vdc

12 W coil for 12 Vdc

144″ 4-Wire RTD Probe with Stainless Steel Sheath capable of measuring -200 °C to +260 °C.

Replacement hanging fixture and reservoir for LCS140 data logging system.

9-Pin Deutsch Connector for use with the Titan S8-CAN

Magnetic holder for use with the UltraShock and Shock300 data loggers

Replacement battery for HiTemp140 Series

36″ or 72″ Type J thermocouple with SMP connector and PFA insulation

36″ or 72″ Type E Thermocouple with SMP Connector

72″ Type K thermocouple with a 6″ stainless steel sheath

Type K Thermocouple with SMP Connector

Replaceable Ammonia Sensor

Power supply with interchangeable plugs

Temperature Probe Installation Pack

Wall bracket for EL-IOT devices

Temperature & Humidity Smart Probe for EL-GFX-D2

Spare/Replacement single Transducer

Replacement SS Pipe Clamp

Extra set of 4 Alkaline D-Cell Batteries

Lightning/Surge Protection in NEMA4 Steel Enclosure

Coupling Tape – lower maintenance for permanent installations (price per foot)

PC4S Doppler Sensor Mounting Kit with Expansion Springs

2 year data plan extension, SignalFire Cloud connectivity, SIM included

Ethernet communications interface card.

Ethernet communications interface card.

Connect to CC-link master to use run command, speed command, and to access inverter's function codes

Adds building automation and control network link to FRENIC-Eco inverters for HVAC applications

Connects to PROFIBUS DP master node to read and write all FRENIC-Eco function codes

Enables other LONWORKS devices in the network to issue commands and monitor the inverter status.