Product Finder

This reverse bending kit allows you to make reverse bends with your NTB7L Power Tube Expander

Spare KF-16 x KF-25 w/ centering rings & clamp

1/4" nylon tube union

L-type mounting bracket

Rubber tubing to 1/4 in ID plastic tube for 1221, 1222, and 1227 manometers

Adapter, brass, 1/8" NPT to 3/16" rubber and 1/8" ID plastic tubing

1 oz dispenser bottle fluorescein green color concentrate

Spare calibration kit for the Dwyer SAH SMART hoods

SMART hood adapter base kit for the Dwyer SAH SMART hoods

Power supply suitable for powering all Dwyer pressure, temperature, or air velocity transmitters

Vane hood kit to convert a thermo-anemometer into an air volume flow balancing tool for use with small grills and diffusers for the...

Carrying case for pitot tubes up to 48 in

Terminal tube, brass, 1/4" diameter tube, 8" length

Digital temperature switch probes to be used with Series TS, TS2, TSX, TSS2, and TSWB instruments

1/8" NPT close coupled street ell, brass

Duct pressure monitor kit

16 ft. shielded cable with 4-pin M-12 connection

Flat aluminum bracket for flush mounting Photohelic and Capsuhelic gauges

Tough gray nylon pouch to protect and series 477AV manometer

Plastic carrying case for Magnehelic® gage of standard range

Plastic 3-way vent valve with 80 PSI rating

Brass safety relief valve protects gages against over pressure

Surface mounting bracket for use with medium pressure or high pressure Magnehelic models only

Set of adaptors for the Fluke Calibration 2271A industrial pressure calibrator

Transducer cable extension up to 500 ft / 150 m (triaxial pair)

Temperature and humidity smart probe with a 2m cable, standard and high accuracy available

Power supply, 100 - 240 VAC

Optional waterproof probes available in various lengths and camera orientations for the DS701 and DS703 FC

1/8" OD tubing "T" union; 250 PSI maximum

1/8 in MNPT x 1/8 in OD tube quick connect; 250 PSI maximum

6 ft male x female DB9 cable

One (1) spare 2 ft hose and fittings for M-600 combination pneumatic calibration pump

Three (2) spare filters and two (2) spare washers for MH-10 pressure calibration pump

Instrument calibration kit

Oversized check valves for smooth controlled operation. Mash proof vent valve (no needle valve)

Standard replacement sensor for the AII GPR-1500 GB/GPR-2500 GB oxygen analyzers

Replacement oxygen sensor for gas mixtures with CO2 for use with the GPR-2600 and GPR-2900 oxygen analyzers

Standard replacement sensor for the AII GPR-2600 oxygen analyzer

Replacement sensor with a lowest range of 0-50 ppb for use with the AII PI2 oxygen analyzer

HART-USB modem with DIN retail and ATEX

SPARE Electronic weighing system capable of measuring both weight and volume, part counter for parts weighing as little as 2 g

4 each 1.125" (28.5 mm) diameter access ports with a window configuration (ST Models Only)

Standard replacement sensor for the aII GPR-1200 and PI2 oxygen analyzers

Replacement sensor for CO2 backgrounds for use with GPR-1100, GPR-1200, GPR-1500, GPR-1600 and GPR-1900 oxygen analyzers

Mini-USB to full USB cable

Regulated 120 VAC - 12 or 24 VDC power supply

Dessicant vent filter for submersible level transmitters

Mounting flange in carbon steel or 316 SS with full or half coupling