Product Finder

MFT4000 Series Pressure Sensor Modules
Pressure sensor modules for use with MFT4000 and MFT 4010 calibrators, available in several types and ranges

OWL-ET-016-SMP Pipe Surface Thermister Probe (Owl)
Stainless steel, 1 in x 3/16 in probe with Owl locking connector, -35°C - 95°C (-30°F - 200°F)

OWL-ET-016 General Purpose Thermistor Probe
Stainless steel, 1 in x 3/16 in temperature probe with Owl locking connector, -35°C - 95°C (-30°F - 200°F)

ET-016-STP Skin Surface Thermistor Probe
Human temperature, stainless steel, 1/3 in x 9/64 in probe, 20°C - 40°C (68°F - 104°F) range

ET-016-SMP Pipe Surface Thermistor Probe
Stainless steel, 1 in x 3/16 in probe, -35°C - 95°C (-30°F - 200°F) range

A2400 RS232/RS485 Converter
Designed to interface all DGH RS485 products to radio and leased telephone line modems

A2000 RS232/RS485 Converter
Allow communications bus lengths up to 4,000 feet and baud rates up to 115.2 K

A1000 Series Serial Communications Converters
RS-232 to RS-485 serial communications converters boxes will convert RS232 signal levels to the correct electrical signals required...

H1700M Series Modbus Digital I/O Boards
24 bit and 64 bit Modbus Digital I/O Boards

H1700 Series Digital I/O Boards
24 bit and 64 bit digital I/O boards

D3200M Modbus Current Output Modules
0 - 20 mA, 4 - 20 mA current output modules

D3100M Modbus Voltage Output Modules
Communicates in ASCII with RS-232 or RS-485 serial ports

TRH Temperature & Relative Humidity Data Logger
Economical dual-channel temperature and relative humidity data logger with five (5) year battery life

IAQ Data Logger
Five (5) channel indoor air quality logger with a ten (10) year battery life

D1000 Voltage Input Modules
Converts analog DC voltage input signals, linearizes the digital data, scales in millivolts and communicates the values to a host...

D8000 Series USB Data Acquisition Modules
USB data acquisition modules for use in process control systems

GP400/500 Series Gauge Isolator
Usable to temperatures of -40° F to +190° F, low cost , usable range 30-20,000 psi

GP140 Series Diaphram Seal
Exceptional gauge protection while maintaining accuracy and sensitivity, more compact design, available in 1/4†or 1/2†process...

Rugged RTD Probe with Metal Strain Relief
100 Ω, 4 wire RTD probe with metal strain relief wrapped, available with a 6 in or 12 in sheath

PR140-O-Ring
One Set of Replacement O-Rings for the PR140

ATI Wind Wrap
Protects sensor holes from being obstructed by mud & debris, mounts to any rifle sling 1 in - 1.5 in wide, or MALICE Clip

Z9P444 USB Card Reader
USB 2.0 compatible data card reader

Z9P000059PN01 Protective Boot
Red protective boot for for M2 series manometers

OWL Series Data Logger
Flexible single-channel data loggers with visual alarm and 10 year battery life

TP05 USB Communications Interface
USB communications interface for configuration and monitoring of Burns PC-programable T51 and T55 transmitters

Z9A1354 Hard Plastic Carrying Case
Hard plastic carrying case to hold the meriGauge plus system

PAD-BOOT-BLACK Black protective rubber case
Black protective rubber case for EL-Datapad and EL-Enviropad-TC

Terminal Block
Pluggable terminal block for use with MadgeTech data loggers

WM-300 Wall Mounting Station
Wall-mounting station built for use with the Cryo-Temp, LyoTemp, TransiTempII, or the TransiTempII-RH

Audible/Visual Alarm
Audible/visual alarm for the multi- and single-zone refrigerant leak detectors

HGM-RD, Remote Display Module
Remote display module for the multi-zone refrigerant leak detectors (HGM-MZ, AGM-MZ)

EH-020A RH Temperature Probe
External humidity and temperature probe for tight or remote locations

PT Transducers
Replacement transducers for the PT400 and PT500 flow meters

H-XPA Magne-Grip Holster, Clip Magnet and Strap
Magne-Grip holster, clip magnet and strap

D3200/D4200 Current Output Modules
Convert serial digital data from a host computer to analog DC current output signals using an internal 12-bit digital to analog...

D3100/D4100 Voltage Output Modules
Convert digital ASCII data signals from a host computer to analog DC voltage output signals using an internal 12-bit digital to...

Z9A84 Thermocouple Calibrator Wiring Kit
Thermocouple wire kit with mini T/C connector, simulation cable and thermocouple adapter

Z9A83 Shorting Plug
Replacement shorting plug for the Meriam M130 thermocouple calibrator

Silva Starter 1-2-3 Compass
Compass has a clear base plate which makes it easy to read a map and set bearings

AC Adaptor for Model 535
110-120 V, 60 Hz adapter for model 535

0204-0020 Lithium Coin Cell Battery for Main PCB
Lithium coin cell battery for main PCB for the PGM-IR, single- and multi-zone refrigerant monitors

CHS Spare Electronics
Spare set electronics with mounting chassis

DIN-145 Thermistor Input Modbus Modules
Convert analog input signals to digital data and transmit via RS-485 using the Modbus RTU protocol for communication

DIN-140 RTD Input Modbus Modules
Convert analog input signals to digital data and transmit via RS-485 using the Modbus RTU protocol for communication

DIN-130 Thermocouple Input Modbus Modules
Convert analog input signals to digital data and transmit via RS-485 using the Modbus RTU protocol for communication

DIN-120 Current Input Modbus Modules
Convert analog input signals to digital data and transmit via RS-485 using the Modbus RTU protocol for communication

DIN-110 Voltage Input Modbus Modules
Convert analog input signals to digital data and transmit via RS-485 using the Modbus RTU protocol for communication

D1700M Modbus Digital I/O Modules
Modules contain seven digital inputs and eight digital outputs