Product Finder

Simultaneously measure and control temperature and humidity using two independent relays and displays

UL approved temperature limit control that provides visual alarm status along with a relay output

NEMA 4X housing, universal high and low power supply models, field selectable engineering units

Monitor surface temperature of water lines or in locations where space is limited

Quickly installed on chilled water lines, air ducts or outside a building without having to run additional wiring

Monitoring hot and chilled water lines throughout a building or mechanical room

Ideal for monitoring the temperature of distribution lines when it is not possible to penetrate the pipe

Used to separate the instrument from the surrounding media

Industrial & HVAC thermocouples and RTDs

CIP sanitary RTDs and reduced tip RTDs for the food and pharmaceutical industry

Cost effective and reliable solution for surface contact temperature measurement

Monitor air or water temp throughout a building management system or an air handler unit

Protection against radiated heat, weatherproof housing

Plastic industry adjustable bayonet thermocouples and RTDs

Temperature and humidity monitor with email alerts

Temperature monitor with email alerts

provides room temperature measurements in a low profile design, 149°C (300°F) max.

204°C (400°F) max. 12″ to 36″ (30.5 to 91.44mm) four point averaging platinum RTD for HVAC and dryer applications

260°C (500°F) max. Averaging RTD for HVAC. Field adjustable shape, up to 13′ (396cm) length.

204°C (400°F) max. 12″ to 36″ (30.5 to 91.44mm) four point averaging platinum RTD with connection head for HVAC and dryer applications

260°C (500°F) max. Averaging RTD with connection head for HVAC. Field adjustable shape, up to 13′ (396cm) length

135°C (275°F) max. Averaging platinum RTD for HVAC. Field adjustable shape, up to 58′ length

Spring loaded platinum RTDs with bayonet fitting (300K) for thermowell applications, -50°C to 200°C

135°C (275°F) max. averaging RTD with connection head for HVAC. Field adjustable shape, up to 58′ length

Spring loaded hex fitting platinum RTD for thermowell applications, available with M12 connector, -196°C to 500°C

General purpose direct and variable immersion platinum RTDs, available with M12 connector (300A), -50°C to 200°C

Sanitary, non-intrusive temperature sensor, available as RTD or thermocouple, short length

General purpose variable immersion therocouple, available in 1/4", 3/16", and 1/8" diameters

Sanitary, non-intrusive temperature sensor with removable sensing element, available as RTD or thermocouple

Sanitary, non-intrusive sensor, available as RTD or thermocouple

Thermowells for Dampening Process Dynamics

Mini RTD sensor 0.125″ (3.175mm) diameter with extended cable

Mini RTD sensor 0.080″ (2.032mm) diameter.

Mini RTD 0.080″ (2.032mm) diameter RTD sensor with extended cable

Sanitary sensor with integral thermowell, available as RTD or thermocouple

Mini RTD Sensor 0.250″ (6.350mm) diameter.

Fast response, heavy duty 1/4" to 1/8" & 1/2" to 1/4" sensors available as RTD or thermocouple

1/8" & 1/4" sensors, available as RTD or Thermocouple

3/16" diameter, 0.05% (precision) and 0.10% (standard) accuracy, meets accuracy and repeatability demands of a highly regulated...

Mini RTD sensor 0.125″ (3.175mm) diameter

Quick Connect - M12 connector, short length sensor, available as RTD

Quick connect - M12 connector, available as RTD

1/8" or 1/4" spring loaded sensors, available as RTD or thermocouple

Ingold® Port Sensor with straight or 15º angle fitting

Threaded surface mount Platinum RTD or thermocouple. Same as the B06 except it includes an extension cable

Threaded surface mount Platinum RTD or thermocouple used with a connection head

Platinum thin film RTD's with standard Class A accuracy ensure optimal performance, transmitters are field programmable