Product Finder

SPARE Electronic weighing system capable of measuring both weight and volume, part counter for parts weighing as little as 2 g

4 each 1.125" (28.5 mm) diameter access ports with a window configuration (ST Models Only)

Standard replacement sensor for the aII GPR-1200 and PI2 oxygen analyzers

Replacement sensor for CO2 backgrounds for use with GPR-1100, GPR-1200, GPR-1500, GPR-1600 and GPR-1900 oxygen analyzers

Mini-USB to full USB cable

Weather-proof enclosure that provides means to protection-mount all Macurco 6-Series gas detectors in non-hazardous locations

Airtight enclosure that provides a means to mount any Macurco gas detector to an air duct

HART® Communicator Software

Rubber boot

Panel mount bracket

Rubber boot, rear port

Rubber boot, bottom port

4-pin bayonet mating connector (E3) with 5 ft. cable ( L1, L3, L10 only)

Lug or water, EPDM or PTFE, electronic or pneumatic actuators

HART - USB modem with DIN rail

HART- USB modem

¾ in. NPT mount junction box with one liquid tight connector and cap with junction terminals

Rotor with PVDF Black, PVDF Natural or ETFE (Tefzel) material options

Transmitter integral mounting kit- NPT, valox, polypropylene or PVDF options

Retaining nut replacement kit- retaining nut, NPT, valox or polypropylane or PVDF

Universal mount junction box

Universal mounting kit

SPARE Cap. KF-16 x .750" Plastic (Pack of 4)

REPLACEMENT / Rebuild O-Rings Core Tools 5/16 in

Digital input plug-in module slot A

RS-485 communications plug-in module slot A

Triac plug-in module slot 2

SSR driver plug-in module slots 2 and 3

Angle adapter for Meriam well type included tube manometers

Plastic line trap, ring type, for Meriam well type manometers

Indicating fluids for the Meriam manometers

N.I.S.T. certificate / scale for Meriam manometers

1/4 in NPT street elbow in steel for the 10AA25 Clean-Out U-Type manometer

Float check valve for Meriam manometers

CPVC cable mounting assembly for use with the pH Rugged Electrode

Four channel swith input module for the QEL Q-Controller

Type K thermocouple with 6 in x 1/8 in dia and a 36 in. long lead wire

Type K thermocouple with 72 in. long lead wire and mini plug

Stainless steel sintered filter, 30 microns with fittings

Rated for 150 PSIG, The HP125 gets installed into a 3.5 inch diameter PVC threaded pipe flange, 4 bolt install, includes rubber gasket

Rated for 300 PSIG, The HP125 gets installed into a 3.75 inch diameter 304 SS Threaded Pipe Flange, 4 bolt install, includes rubber...

Bearing

Gasket

Six (6) authentic Dickson red pens

Bluetooth Headset for TiX560, TiX520, TiX500, Ti450, Ti400, Ti300, TiS75, TiS65, TiS60, TiS55, TiS50, TiS45, TiS40, TiS20, TiS10

Mounting bracket for use with the Dwyer wireless differential pressure probes

Heavy duty hard case with pre-cut foam inserts for the Dwyer UHH2 and additional sensors

Field upgradeable LCD for the Dwyer Magnesense II differential transmitter