`
Low-cost 1/8 DIN digital panel meter for display only applications
Intrinsically safe and nonincendive, 1/8 DIN, loop-powered process meter with 4 front panel buttons and a dual line display (5 digit top line and 8 digit bottom line)
General-purpose, 1/8 DIN, loop-powered process meter with 4 front panel buttons and a dual line display (5 digit top line and 8 digit bottom line)
Low cost, simple to use, display only applications
1/8 DIN digital panel meters that accepts a process current (4-20 mA) or process voltage (0-5V, 1-5V, etc.) signal
Compact, panel-space saving, four and eight channel, low-cost, easy to use, perfect for replacing stand-alone lights
Installed in a variety of harsh operating environments to provide convenient and informative display of any 4-20 mA signal
Installed virtually anywhere to provide convenient and informative display of any 4-20 mA signal
Simple, straightforward way to get an analog, discrete, or Modbus® signal from where you have it to where you need it
Consists of field units (up to 32) that accept 4-20 mA signals and transmits them wirelessly to a base station
4-20 mA current loop, provides a convenient way to generate a 4-20 mA signal that can be used to control another device
Measure and source T/Cs, RTDs, ohms, current, voltage
Accepts 4-20 mA inputs, flow meter pulse inputs, digital inputs, and Modbus RTU inputs and displays them both in numeric and bargraph format on a large, 5.7" color display
Programmed to display a value of 0-100% relating to the 4-20 mA output
DIN mountable models for signal isolation, splitting and conditioning of 4-20 mA and 0-10 VDC signals
Converts the current flowing through a cable or wire to a 4-20 mA signal
Converts the high current flowing through a cable or wire to a 0-5 A output and are available in ranges of 100, 200, 400, 600, and 1000 Amps
PID Process & Temperature Controllers are a complete line of PID and on/off controllers
Installed virtually anywhere to provide convenient and informative display of any 4-20 mA signal
Installed virtually anywhere to provide convenient and informative display of any 4-20 mA signal
Installed in a variety of harsh operating environments to provide convenient and informative display of any 4-20 mA signal
Versatile meter that will satisfy a wide variety of process and temperature applications
1/8 DIN, accepts a DC voltage input up to 300 VDC, built-in 4-20 mA isolated transmitter
1/8 DIN flow rate/totalizer, dual-line display (5 digits on top, 8 on bottom), designed for demanding process control applications
Dual line display, super bright LEDs can be read in bright sunlight up to 100 feet away
Display will read up to 99 feet, 11 & 15/16s inches on the upper line, operate from -40 to 150°F
Displays two 4-20 mA inputs, each transmitter is provided with its own 24 VDC transmitter power supply
Dual analog inputs, displays up to 16 Modbus registers, accepts two 4-20 mA signals
Dual analog inputs, displays up to 16 Modbus registers, operates from -40 to 150°F
Ideal for weighing applications or outside in the bright sunlight in temperatures between -40 to 150°F
Displays both flow rate and total at the same time from a 4-20 mA output flowmeter, IP65 rated field mountable enclosure
Batch controlling using a 4-20 mA output flowmeter, huge display, IP65 rated field mountable enclosure
Displays two 4-20 mA flowmeter inputs on one meter and rate and total simultaneously, math functions
Displays both flow rate and total at the same time from a pulse output flowmeter, IP65 rated field mountable enclosure
For Batch controlling using a pulse output flowmeter, huge display, IP65 rated field mountable enclosure
Displays two pulse flowmeter inputs on one meter, performs a variety of math functions
Displays voltage and current on one large display meter, computes and displays apparent power
Accept a variety of thermocouples and RTDs and displays temperature on a six digit display
1/8 DIN digital panel meters designed to display level in feet and inches, 4-20 mA or 0-5V, 1-5V, etc., dual line display
1/8 DIN, dual analog input, process current (4-20 mA) or process voltage (0-5V, 1-5V, etc.), dual line, 6-digit display
Multi-purpose decimal display and controller, scans up to 16 Modbus process variables and accepts two analog process inputs
Displays level information on a feet and inches display, scans up to 16 Modbus process variables, dual analog inputs
Decimal display, displays up to 16 Modbus process variables (PVs) on the bus using its RS-485 serial input
Displays level information on a feet & inches display, scans up to 16 Modbus process variables
1/8 DIN, accepts strain gauge & load cell inputs and mV signals up to 300 mV (unipolar) and ± 250 mV (bipolar) for weight indication and force measurement applications
1/8 DIN, designed to display flow rate and total from an analog output (4-20 mA, 0-5 V, 1-5 V, etc.) flowmeter
1/8 DIN analog input (4-20 mA, 0-5 V, 1-5 V, etc.) digital batch controller designed for single and multi-stage batching applications
1/8 DIN, designed to display flow rate and total from two analog output (4-20 mA, 0-5 V, 1-5 V, etc.) flowmeters
1/8 DIN, displays flow rate and total from a pulse output (NPN, PNP, TTL, switch contact, sine wave, etc.) flowmeter
1/8 DIN pulse input (NPN, PNP, TTL, switch contact, sine wave, etc.) digital batch controller designed for single and multi-stage batching applications